What are the symptoms of error code Er:22?

Washer stops before spinning, Clothes remain wet at the end of the cycle, Drum thumps loudly before stopping, Er:22 appears during spin ramp-up

What causes error code Er:22?

Unbalanced load (e.g., single heavy item), Worn suspension or shock absorbers, Faulty motor tachometer, Loose drum weights

How do I fix error code Er:22?

Redistribute the laundry and restart the spin cycle., Avoid washing single heavy items alone., Inspect suspension shocks for wear., Check the motor tachometer wiring.

Bosch Washer - Er:22 Error Code

The washer aborted the spin cycle due to imbalance or safety conditions.

Meaning

The washer aborted the spin cycle due to imbalance or safety conditions.

The Bosch Er:22 error code indicates that the washer attempted to enter the spin cycle but detected an unsafe imbalance condition. Legacy Bosch washers use motor feedback and drum movement sensors to determine whether the load is evenly distributed. If the imbalance is too severe, the washer aborts the spin to prevent damage to the drum, bearings, and suspension system.

Symptoms

Washer stops before spinning
Clothes remain wet at the end of the cycle
Drum thumps loudly before stopping
Er:22 appears during spin ramp-up

Causes

Unbalanced load (e.g., single heavy item)
Worn suspension or shock absorbers
Faulty motor tachometer
Loose drum weights

🔧

Step-by-Step Fixes

Redistribute the laundry and restart the spin cycle.
Avoid washing single heavy items alone.
Inspect suspension shocks for wear.
Check the motor tachometer wiring.

⚠️

Safety Notes

Stop the washer immediately if the drum shakes violently.

📋

Applicable Models

Show Models

WFL2060
WFR2460
WFMC3301

📁

Bosch Washer Er:23 – The washer detected a software or control module error.

📁

Other Bosch Washer Error Codes

Show All Error Codes

Model-Specific Notes

On WFMC models, Er:22 is more common when washing small loads that cannot balance properly.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.