Electrolux Washer - 15 Error Code

The washer detected that the motor is stalled.

Meaning

The washer detected that the motor is stalled.

Error 15 indicates that the motor attempted to start but could not rotate. This is typically caused by seized bearings, jammed drum, or severe overload. The inverter detects excessive current draw and shuts down the motor to prevent damage.

Symptoms

  • Drum does not move at all
  • Washer clicks or hums without rotation
  • Error 15 appears immediately after startup

Causes

  • Seized drum bearings
  • Foreign object jammed between drum and tub
  • Motor failure
πŸ”§

Step-by-Step Fixes

  • Attempt to rotate the drum by hand.
  • Inspect for foreign objects.
  • Check bearings for seizure.
  • Test motor windings.
⚠️

Safety Notes

  • Disconnect power before servicing.
πŸ“‹

Applicable Models

Show Models
  • W465H
  • W465H2
  • WH6-33
πŸ“

Related Pages

πŸ“

Other Electrolux Washer Error Codes

Show All Error Codes

Model-Specific Notes

On WH6 models, Error 15 often appears when coins or metal objects become lodged in the drum gap.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.