Electrolux Washer - 25 Error Code

The washer detected excessive water level during heating.

Meaning

The washer detected excessive water level during heating.

Error 25 indicates that the washer detected a water level above the safe heating threshold. Commercial Electrolux washers require precise water levels for heating efficiency and safety. If the drum is overfilled, heating is disabled to prevent boiling, steam bursts, or heater damage.

Symptoms

  • Washer stops during heating
  • Water level appears too high
  • Error 25 appears early in wash

Causes

  • Stuck inlet valve
  • Faulty pressure sensor
  • Blocked pressure hose
πŸ”§

Step-by-Step Fixes

  • Inspect inlet valve for sticking.
  • Check pressure hose for blockages.
  • Test pressure sensor accuracy.
⚠️

Safety Notes

  • Do not operate heater with excessive water level.
πŸ“‹

Applicable Models

Show Models
  • W465H
  • W465H2
  • WH6-14
πŸ“

Related Pages

πŸ“

Other Electrolux Washer Error Codes

Show All Error Codes

Model-Specific Notes

On W465H models, Error 25 may appear if the inlet valve leaks slightly during heating.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.