Electrolux Washer - 30 Error Code

The washer detected an electrical fault in the water level sensor circuit.

Meaning

The washer detected an electrical fault in the water level sensor circuit.

Error 30 indicates that the washer detected an electrical fault in the pressure sensor (water level sensor) circuit. This includes shorts, open circuits, unstable voltage, or corrupted sensor feedback. Because the pressure sensor is critical for safe filling, heating, and draining, the washer immediately halts operation when this fault is detected. Error 30 is one of the more serious water‑level related faults on Electrolux W465H and WH6 commercial washers.

Symptoms

  • Washer stops immediately at startup
  • Water level readings are missing, erratic, or frozen
  • Error 30 appears before or during filling
  • Washer refuses to begin heating or spinning

Causes

  • Shorted or open pressure sensor
  • Broken or corroded wiring harness
  • Moisture intrusion into the sensor connector
  • Control board input circuit failure
🔧

Step-by-Step Fixes

  • Inspect the wiring harness between the pressure sensor and control board for breaks or corrosion.
  • Test the pressure sensor for correct voltage and resistance values.
  • Dry and clean the sensor connector if moisture is present.
  • Replace the pressure sensor if readings remain unstable.
  • Replace the control board if the sensor tests good but the fault persists.
⚠️

Safety Notes

  • Disconnect power before servicing any electrical or sensor components.
  • Do not operate the washer until the pressure system is functioning correctly.
📋

Applicable Models

Show Models
  • W465H
  • W465H2
  • W465H3
  • WH6-14
📁

Related Pages

📁

Other Electrolux Washer Error Codes

Show All Error Codes

Model-Specific Notes

On WH6 models, Error 30 commonly appears after moisture intrusion caused by steam venting or high‑humidity laundry rooms.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.