Frigidaire Washer - E24 Error Code

The drain pump triac on the control board has failed.

Meaning

The drain pump triac on the control board has failed.

The Frigidaire E24 error code indicates that the control boardโ€™s triac (the electronic switch that controls the drain pump) is shorted, open, or malfunctioning. This is a more severe version of E23 and typically requires control board replacement.

Symptoms

  • Pump does not run
  • Pump runs constantly
  • E24 appears during drain

Causes

  • Shorted triac
  • Burned control board
  • Pump overcurrent damaging the triac
๐Ÿ”ง

Step-by-Step Fixes

  • Inspect control board for damage.
  • Test pump for shorts.
  • Replace control board if triac is defective.
โš ๏ธ

Safety Notes

  • Do not operate the washer with a shorted triac.
๐Ÿ“‹

Applicable Models

Show Models
  • FAFS4272LW
  • FAFW3801LW
  • ATF7000FS
๐Ÿ“

Related Pages

๐Ÿ“

Other Frigidaire Washer Error Codes

Show All Error Codes

Model-Specific Notes

On Affinity washers, E24 often appears after the pump draws excessive current due to debris.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.