Kenmore Washer - F0E4 Error Code

Spin speed limited due to water temperature.

Meaning

Spin speed limited due to water temperature.

The F0E4 error indicates that the washer limited or prevented high‑speed spin because the incoming water temperature was outside the expected range. Kenmore explains that this code appears when hot water is too cold, cold water is too warm, or temperature readings do not match valve operation.

Symptoms

  • Washer refuses to enter high‑speed spin
  • Cycle takes longer than normal
  • Water temperature feels incorrect

Causes

  • Hot and cold water supply reversed
  • Faulty temperature sensor
  • Inlet valve not opening correctly
  • Household water supply temperature issue
🔧

Step-by-Step Fixes

  • Verify hot and cold hoses are connected correctly.
  • Check inlet valve screens for blockage.
  • Test temperature sensor for correct readings.
  • Ensure household water supply meets temperature requirements.
⚠️

Safety Notes

  • Turn off water supply before adjusting hoses.
📋

Applicable Models

Show Models
  • Kenmore HE Top‑Load: 110.28102310
  • Kenmore Oasis HE: 110.27062600
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F0E4 is most common when cold water enters at warm temperatures during summer months.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.