Kenmore Washer - F24 Error Code

Water temperature sensor malfunction.

Meaning

Water temperature sensor malfunction.

The F24 error indicates that the washer’s water temperature sensor (thermistor) is reporting out‑of‑range values. Kenmore explains that this code appears when the sensor detects temperatures that are too high, too low, or inconsistent with expected readings.

Symptoms

  • Washer stops mid‑cycle with F24 displayed
  • Water temperature is incorrect
  • Heated cycles fail to progress
  • Washer remains cold during sanitize cycles

Causes

  • Faulty thermistor
  • Loose or damaged wiring
  • Heater overheating
  • Control board sensor circuit failure
🔧

Step-by-Step Fixes

  • Test thermistor resistance at room temperature.
  • Inspect wiring harness for damage.
  • Replace thermistor if readings are incorrect.
  • Replace control board if sensor circuit is faulty.
⚠️

Safety Notes

  • Disconnect power before servicing internal components.
📋

Applicable Models

Show Models
  • Kenmore HE4t: 110.45081400
  • Kenmore HE5t: 110.47081600
  • Kenmore HE5 Elite: 110.47751800
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F24 often appears alongside F23 when both the heater and thermistor circuits are affected.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.