Whirlpool Washer - F14 Error Code

EEPROM or memory error.

Meaning

EEPROM or memory error.

The F14 error indicates that the washerโ€™s central control unit (CCU) has detected corrupted or unreadable EEPROM memory. The EEPROM stores cycle parameters, configuration data, and operational logic. If the CCU cannot read or validate this data, the washer triggers F14 and halts operation. This error is often caused by firmware corruption, voltage spikes, or internal CCU failure.

Symptoms

  • Washer will not start
  • Cycle stops immediately
  • F14 appears on power-up
  • Washer becomes unresponsive

Causes

  • Corrupted EEPROM memory
  • Failed central control unit
  • Voltage irregularities
  • Loose CCU wiring harness
๐Ÿ”ง

Step-by-Step Fixes

  • Unplug the washer for 5 minutes to reset the CCU.
  • Ensure stable voltage at the outlet.
  • Inspect CCU wiring harness connections.
  • Replace the CCU if the error persists.
โš ๏ธ

Safety Notes

  • Disconnect power before accessing the CCU.
๐Ÿ“‹

Applicable Models

Show Models
  • GHW9100LW
  • GHW9150PW
๐Ÿ“

Related Pages

๐Ÿ“

Other Whirlpool Washer Error Codes

Show All Error Codes

Model-Specific Notes

On Duet models, F14 often appears after power outages or brownouts due to sensitive EEPROM memory handling.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.