Whirlpool Washer - F34 Error Code

Water level out of expected range.

Meaning

Water level out of expected range.

The F34 error indicates that the washer has detected a water level that is outside the expected range for the current cycle. Whirlpool Cabrio and HE washers use a pressure switch or analog pressure sensor to monitor water level. If the sensor detects a level that is too high, too low, or inconsistent with the washerโ€™s fill stage, the washer triggers F34 to prevent overfilling or dry operation.

Symptoms

  • Washer overfills or underfills
  • Washer drains unexpectedly
  • Cycle stops during sensing or fill
  • F34 appears early in the cycle

Causes

  • Faulty pressure switch or sensor
  • Blocked pressure hose
  • Air leaks in the pressure system
  • Control board misinterpreting sensor values
๐Ÿ”ง

Step-by-Step Fixes

  • Inspect the pressure hose for blockages or leaks.
  • Ensure the hose is firmly connected.
  • Test the pressure switch or sensor.
  • Replace the sensor if readings are out of range.
โš ๏ธ

Safety Notes

  • Disconnect power before accessing the pressure system.
๐Ÿ“‹

Applicable Models

Show Models
  • WTW6200VW
  • WTW6300WW
๐Ÿ“

Related Pages

๐Ÿ“

Other Whirlpool Washer Error Codes

Show All Error Codes

Model-Specific Notes

On Cabrio models, F34 often appears when the pressure hose becomes partially blocked by detergent residue.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.