Whirlpool Washer - F7 Error Code

Motor unable to start or run.

Meaning

Motor unable to start or run.

The F7 error indicates that the washer’s motor could not start or run correctly. Whirlpool Cabrio and HE washers use a direct‑drive motor controlled by the motor control unit (MCU). If the motor fails to rotate when voltage is applied, or if the MCU detects abnormal current draw, the washer triggers F7 to prevent damage. This error is common when the motor capacitor fails, the motor windings are damaged, or the drive system is obstructed.

Symptoms

  • Washer hums but does not move
  • Drum does not agitate or spin
  • Cycle stops shortly after starting
  • F7 appears during wash or spin

Causes

  • Failed motor capacitor
  • Faulty motor windings
  • Loose or damaged wiring harness
  • Obstruction in the drive system
  • Failed motor control unit
🔧

Step-by-Step Fixes

  • Inspect the motor capacitor for bulging or leakage.
  • Test motor windings with a multimeter.
  • Check wiring harness connections.
  • Inspect the drive system for obstructions.
  • Replace the motor or MCU if necessary.
⚠️

Safety Notes

  • Disconnect power before accessing the motor.
📋

Applicable Models

Show Models
  • WTW6200VW
  • WTW6300WW
  • WTW6600VW
📁

Related Pages

📁

Other Whirlpool Washer Error Codes

Show All Error Codes

Model-Specific Notes

On early Cabrio models, the motor capacitor is a frequent failure point leading to F7 errors.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.